LAYHER COMMERCIAL & INDUSTRIAL ROLLING TOWERS
LAYHER COMMERCIAL & INDUSTRIAL ROLLING TOWERS
SAFETY INCLUDED
SAFETY INCLUDED
Layher sets standards. All rolling towers and assembly scaffolding conform to DIN EN 1004. Inspections by independent institutions such as TÜV and the professional trade associations with the GS symbol are a guarantee of this.
FOR THE HIGHEST PERFORMANCE AT GREATER HEIGHTS YOU NEED GOOD STABILITY.
Castors
Robust castors for good maneuverability and steady positioning when working. A range of castor coatings allow them to be used on delicate floor surfaces as well. The steel spindles provide all easy and precise height adjustment and distribute the load centrally on the locked castor. The stability is increased as a result, so that the user can work efficiently.
Ladder Frames
The ladder frame is a framework and also serves as a ladder. The ribbing on the steps ensures a high level of slip and grip safety in a vertical ladder.
Ladder frames are available in lengths of 1.00 m and 2.00 m and in widths of 0.75 m and 1.50 m.
Long, conical pipe couplings ensure a secure and smooth plug connection of one ladder frame to another, which can be secured easily using a spring cotter pin.
Guardrails and Diagonal Braces
Unsurpassed quick and tool-free connection. With a gentle press the claw snaps on automatically. The range of colors for the claw fingers on guardrails and diagonal braces helps where various different components are present – which saves time.
Decks
Robust decks made of aluminum frames with plywood inserts and snap-on claws enable easy handling.
They have non-slip profiles for firm and safe footing, even when wet. At a width of 68 cm the largest possible working area is achieved.
The snap-on claws, which come in a range of shapes, allow easy 1-man installation and at the same time provide 4-way lift-off protection.
The toe-boards, which protect against falling material or tools, form a self-retaining ring to protect the maximum working area.
Stability
The stability of the mobile scaffold must be guaranteed in all phases of installation and removal. Depending on the installation height and whether the scaffold is built in an open or enclosed area, the following steps must be taken:
- Installation of mobile beams
- Use of stabilizers
- Ballast
FOR THE HIGHEST PERFORMANCE AT GREATER HEIGHTS YOU NEED GOOD STABILITY.
Castors
Robust castors for good maneuverability and steady positioning when working. A range of castor coatings allow them to be used on delicate floor surfaces as well. The steel spindles provide all easy and precise height adjustment and distribute the load centrally on the locked castor. The stability is increased as a result, so that the user can work efficiently.
Ladder Frames
The ladder frame is a framework and also serves as a ladder. The ribbing on the steps ensures a high level of slip and grip safety in a vertical ladder.
Ladder frames are available in lengths of 1.00 m and 2.00 m and in widths of 0.75 m and 1.50 m.
Long, conical pipe couplings ensure a secure and smooth plug connection of one ladder frame to another, which can be secured easily using a spring cotter pin.
Guardrails and Diagonal Braces
Unsurpassed quick and tool-free connection. With a gentle press the claw snaps on automatically. The range of colors for the claw fingers on guardrails and diagonal braces helps where various different components are present – which saves time.
Decks
Robust decks made of aluminum frames with plywood inserts and snap-on claws enable easy handling.
They have non-slip profiles for firm and safe footing, even when wet. At a width of 68 cm the largest possible working area is achieved.
The snap-on claws, which come in a range of shapes, allow easy 1-man installation and at the same time provide 4-way lift-off protection.
The toe-boards, which protect against falling material or tools, form a self-retaining ring to protect the maximum working area.
Stability
The stability of the mobile scaffold must be guaranteed in all phases of installation and removal. Depending on the installation height and whether the scaffold is built in an open or enclosed area, the following steps must be taken:
- Installation of mobile beams
- Use of stabilizers
- Ballast
MORE SAFETY ON CONSTRUCTION
MORE SAFETY ON CONSTRUCTION
To comply with European safety laws and requirements, the Layher product portfolio includes Safety Structure P2. Safety Structure P2 provides collective protection.
If you already possess a Layher Rolling Tower, then you can convert this into the P2 variant easily.
SAFETY STRUCTURE P2.
SAFETY STRUCTURE P2.
The simple assembly principle
All-round side protection already present when the top platforms are accessed.
More stability in the tower thanks to additional bracing.
Platforms spaced 2 m apart
Maximum safety during assembly , during ascent and descent and during work.
Easy passing of rolling tower parts or working materials from level to level.
The innovative Uni assembly hook
Assembly is considerably facilitated, and fast and trouble-free assembly and dismantling are assured.
The simple assembly principle
All-round side protection already present when the top platforms are accessed.
More stability in the tower thanks to additional bracing.
Platforms spaced 2 m apart
Maximum safety during assembly , during ascent and descent and during work.
Easy passing of rolling tower parts or working materials from level to level.
The innovative Uni assembly hook
Assembly is considerably facilitated, and fast and trouble-free assembly and dismantling are assured.
THE PRINCIPLE – SIMPLE. FAST. SAFE.
THE PRINCIPLE – SIMPLE. FAST. SAFE.
THE RIGHT ROLLING TOWER FOR EVERY JOB
SoloTower – For Fast, Simple and Safe Single-Person Assembly
The SoloTower from Layher is a small rolling tower that can be assembled quickly, safely and easily by a single person, up to a working height of 6.15 metres.
- Working height: 6.15 m
- Area of work platform: 0.75 x 1.13 m
- Permissible live load: 2 kN/m² (scaffolding group 3)
- Economical, efficient and ergonomical logistics for storage and transport and at the site, due to compact dimensions of all components.
- More safety when moving to the next platform up, due to double guardrail preassembled using the 3-T method.
- Safer assembly and dismantling by only one person, due to passing of the compact components from level to level using the SoloTower assembly hook.
- Tool-free, quick and easy assembly due to the proven Layher connection technology of snap-on claw.
- End and side toe boards made of aluminum and preassembled to create a folding toe board ensure rapid fitting to the platform.
- Design to European standard DIN EN 1004 for mobile work platforms, for maximum quality and safety.
Zifa P2 The Ready-to-use Tower for Work at Low Heights
Folded together flat for storage and transport – unfold it, insert the deck. That’s all.
- The basic unit will fit through standard room doors when assembled and fully loaded.
- Aluminum basic tower for alternating-sequence push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100), also as an access deck for risk-free internal access.
- Strong and permanently fitted castors ensure excellent stability.
- Working height: 7.76 m
- Area of working platform: 0.75 x 1.80 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Light P2 – The Practical Rolling Tower when Working in Restricted Spaces
The UniLight Tower P2 is a compact and lightweight rolling tower for safe and convenient work wherever you used to need a ladder – the generous 1.3 m² platform area permits unimpeded movement and provides space for tools and material.
- Its low weight and convenient dimensionsmake it very easy to transport, even in a van.
- Aluminum ladder frames for push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck for risk-free internal access; statutory rest platform already integrated.
- Strong castors (permanently fitted) ensure outstanding stability.
- Rigid steel mobile beam to widen the base; with spigots for optional mounting of ladder frames when working on ceilings or walls.
- Working height: 9.26 m
- Area of working platform: 0.75 x 1.80 m.
Uni Compact P2 As a Compact Universal Tower with Double-width Work Deck
The universal Uni Compact P2 tower with double-width work deck yet with compact basic dimensions – offers ample room for working at heights, even with materials, while still leaving plenty of freedom of movement.
- Aluminum ladder frames (1.5 m wide) for push-fit assembly; aluminum guardrailsand diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck for risk-free internal access; statutory rest platforms already integrated.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Widening of base: with steel mobile beam, telescope option for work on ceilings or walls, only needed at working heights of 8.38 m and above.
- Working height 10.38 m
- Area of working platform: 1.5 x 1.8 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Standard P2 – The Most Versatile Rolling Tower for Very High-level Work
The Uni Standard P2 – for work on walls and ceilings, on machinery, in technical facilities, factories and warehouses, indoors and outdoors.
- Aluminum ladder frames for push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100), -also as an access deck for risk-free internal access; statutory rest platforms already integrated.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Widening of base: rigid or telescopic mobile steel beam , with spigots for optional mounting of ladder frames for work on ceilings and walls; alternatively with tower supports.
- For even more safety and even more convenient access, suspended ladders with wide steps.
- Working height 13.38 m
- Area of working platform: 0.75 x 2.85 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Wide P2 – The Universal Tower for Very High-level Work with Double-width Work Deck
The Uni Wide P2 universal tower with double-width work deck provides a convenient platform when working at height.
- Ideal for working with bulky materials while assuring the necessary freedom of movement.
- Aluminum ladder frames (1.5 m wide) for push-fit assembly; aluminum guardrailsand diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck for risk-free internal access; statutory rest platforms already integrated.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Widening of base: with steel mobile beam, telescope option for work on ceilings or walls, only needed at working heights of 8.6 m and above; alternatively with tower supports.
- For even more safety and even more convenient access, suspended ladders with wide steps.
- Working height 13.38 m
- Area of working platform: 1.50 x 2.85 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Comfort – The Universal Tower with Convenient Stairway Access
The compact Uni Comfort tower is ideally suited for assembly and maintenance work etc.
- The convenient stairway access with full-length handrail facilitates frequent ascents and descents, permits very high-level work and leaves the hands free to carry tools and material.
- Aluminum ladder frames (1.5 m wide) for push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck with full-length opening for convenient internal access.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Outriggers for base widening can be attached without using tools. If these are fitted with castors, the tower can be moved safely without being dismantled.
- Working height 14.2 m
- Area of working platform: 1.50 x 1.80 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Staro Rolling Tower – The Ready-to-use Tower for Freedom of Movement and a Large Working Area
The Staro rolling tower is the “ready-to-use” tower with a large work deck. It is indispensable for fast work on large ceiling surfaces or for assembling components or for installation work underneath the ceiling. The large work surface offers ample freedom of movement and space for storing tools and materials ready to hand.
- Aluminum basic tower; aluminum guardrails and intermediate guardrails snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100).
- Sturdy castors (dia. 150 mm) with concentric load transmission after locking for outstanding stability. Leg tube (1.95 m long) with holes 11 cm apart for height adjustment.
- Working height 3.90 m
- Area of working platform: 1.95 x 1.95 m.
- Permissible live load: 1.5 kN/m² (scaffolding group 2).
Aluminum Bridging Beam 600 – The Work Deck for lengths up to 10 M
The Aluminum Bridging Beam 600 is a time-saving and practical component. Because it is manufactured from lightweight aluminum sections, it is both light and strong. Depending on the application, it is also possible to attach a three-piece side protection to the Aluminum Bridging Beam.
- Conforms to DIN EN 12811-1.
- Permissible load class 2 (1.5 kN/m² up to 10 m length)
- Permissible load class 3 (2 kN/m² up to 7.1 m length)
THE RIGHT ROLLING TOWER FOR EVERY JOB
SoloTower – For Fast, Simple and Safe Single-Person Assembly
The SoloTower from Layher is a small rolling tower that can be assembled quickly, safely and easily by a single person, up to a working height of 6.15 metres.
- Working height: 6.15 m
- Area of work platform: 0.75 x 1.13 m
- Permissible live load: 2 kN/m² (scaffolding group 3)
- Economical, efficient and ergonomical logistics for storage and transport and at the site, due to compact dimensions of all components.
- More safety when moving to the next platform up, due to double guardrail preassembled using the 3-T method.
- Safer assembly and dismantling by only one person, due to passing of the compact components from level to level using the SoloTower assembly hook.
- Tool-free, quick and easy assembly due to the proven Layher connection technology of snap-on claw.
- End and side toe boards made of aluminum and preassembled to create a folding toe board ensure rapid fitting to the platform.
- Design to European standard DIN EN 1004 for mobile work platforms, for maximum quality and safety.
Zifa P2 The Ready-to-use Tower for Work at Low Heights
Folded together flat for storage and transport – unfold it, insert the deck. That’s all.
- The basic unit will fit through standard room doors when assembled and fully loaded.
- Aluminum basic tower for alternating-sequence push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100), also as an access deck for risk-free internal access.
- Strong and permanently fitted castors ensure excellent stability.
- Working height: 7.76 m
- Area of working platform: 0.75 x 1.80 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Light P2 – The Practical Rolling Tower when Working in Restricted Spaces
The UniLight Tower P2 is a compact and lightweight rolling tower for safe and convenient work wherever you used to need a ladder – the generous 1.3 m² platform area permits unimpeded movement and provides space for tools and material.
- Its low weight and convenient dimensions make it very easy to transport, even in a van.
- Aluminum ladder frames for push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck for risk-free internal access; statutory rest platform already integrated.
- Strong castors (permanently fitted) ensure outstanding stability.
- Rigid steel mobile beam to widen the base; with spigots for optional mounting of ladder frames when working on ceilings or walls.
- Working height: 9.26 m
- Area of working platform: 0.75 x 1.80 m.
Uni Compact P2 As a Compact Universal Tower with Double-width Work Deck
The universal Uni Compact P2 tower with double-width work deck yet with compact basic dimensions – offers ample room for working at heights, even with materials, while still leaving plenty of freedom of movement.
- Aluminum ladder frames (1.5 m wide) for push-fit assembly; aluminum guardrailsand diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck for risk-free internal access; statutory rest platforms already integrated.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Widening of base: with steel mobile beam, telescope option for work on ceilings or walls, only needed at working heights of 8.38 m and above.
- Working height 10.38 m
- Area of working platform: 1.5 x 1.8 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Standard P2 – The Most Versatile Rolling Tower for Very High-level Work
The Uni Standard P2 – for work on walls and ceilings, on machinery, in technical facilities, factories and warehouses, indoors and outdoors.
- Aluminum ladder frames for push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100), -also as an access deck for risk-free internal access; statutory rest platforms already integrated.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Widening of base: rigid or telescopic mobile steel beam , with spigots for optional mounting of ladder frames for work on ceilings and walls; alternatively with tower supports.
- For even more safety and even more convenient access, suspended ladders with wide steps.
- Working height 13.38 m
- Area of working platform: 0.75 x 2.85 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Wide P2 – The Universal Tower for Very High-level Work with Double-width Work Deck
The Uni Wide P2 universal tower with double-width work deck provides a convenient platform when working at height.
- Ideal for working with bulky materials while assuring the necessary freedom of movement.
- Aluminum ladder frames (1.5 m wide) for push-fit assembly; aluminum guardrailsand diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck for risk-free internal access; statutory rest platforms already integrated.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Widening of base: with steel mobile beam, telescope option for work on ceilings or walls, only needed at working heights of 8.6 m and above; alternatively with tower supports.
- For even more safety and even more convenient access, suspended ladders with wide steps.
- Working height 13.38 m
- Area of working platform: 1.50 x 2.85 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Uni Comfort – The Universal Tower with Convenient Stairway Access
The compact Uni Comfort tower is ideally suited for assembly and maintenance work etc.
- The convenient stairway access with full-length handrail facilitates frequent ascents and descents, permits very high-level work and leaves the hands free to carry tools and material.
- Aluminum ladder frames (1.5 m wide) for push-fit assembly; aluminum guardrails and diagonal braces snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100) as an access deck with full-length opening for convenient internal access.
- Sturdy castors with concentric load transmission after locking for outstanding stability, and steel spindles for levelling.
- Outriggers for base widening can be attached without using tools. If these are fitted with castors, the tower can be moved safely without being dismantled.
- Working height 14.2 m
- Area of working platform: 1.50 x 1.80 m.
- Permissible live load: 2 kN/m² (scaffolding group 3).
Staro Rolling Tower – The Ready-to-use Tower for Freedom of Movement and a Large Working Area
The Staro rolling tower is the “ready-to-use” tower with a large work deck. It is indispensable for fast work on large ceiling surfaces or for assembling components or for installation work underneath the ceiling. The large work surface offers ample freedom of movement and space for storing tools and materials ready to hand.
- Aluminum basic tower; aluminum guardrails and intermediate guardrails snap in easily.
- Work decks with aluminum frame and plywood insert (BFU 100).
- Sturdy castors (dia. 150 mm) with concentric load transmission after locking for outstanding stability. Leg tube (1.95 m long) with holes 11 cm apart for height adjustment.
- Working height 3.90 m
- Area of working platform: 1.95 x 1.95 m.
- Permissible live load: 1.5 kN/m² (scaffolding group 2).
Aluminum Bridging Beam 600 – The Work Deck for lengths up to 10 M
The Aluminum Bridging Beam 600 is a time-saving and practical component. Because it is manufactured from lightweight aluminum sections, it is both light and strong. Depending on the application, it is also possible to attach a three-piece side protection to the Aluminum Bridging Beam.
- Conforms to DIN EN 12811-1.
- Permissible load class 2 (1.5 kN/m² up to 10 m length)
- Permissible load class 3 (2 kN/m² up to 7.1 m length)
EXPANSIONS AND VARIANTS
Bracket Deck Surfaces – Widening of The Working Surface for Uni Standard and Uni Wide
Special designs are individualised tower structures that make work safer and faster at many construction sites.
- Subsequent fitting to the complete rolling tower is possible
- Quick and easy widening of the working surface
- by up to 1.5 m
- Permissible live load: 1.5 kN/m² (scaffolding group 2)
Double Construction for Uni Standard
Special designs are individualised tower structures that make work safer and faster at many construction sites.
- This special design conforms to the minimum requirements as per DIN EN 1004.
- Working height 8.35 m
- Area of working platform: 2.0 x 2.85 m.
- Permissible live load: 1.5 kN/m² (scaffolding group 2).
Tower Supports for Uni Standard P2 & Uni Wide P2
- The Uni Standard P2 and Uni Wide P2 rolling towers are also available with tower supports.
- They are supplied complete as a set in a wide range of assembly heights up to a working height of 13.2 m.
- The use of Layher tower supports means that the mobile beam is no longer required and the overall weight of the tower is reduced by up to 43 kg. In addition, fewer ballast weights are needed.
EXPANSIONS AND VARIANTS
EXPANSIONS AND VARIANTS
Bracket Deck Surfaces – Widening of The Working Surface for Uni Standard and Uni Wide
Special designs are individualised tower structures that make work safer and faster at many construction sites.
- Subsequent fitting to the complete rolling tower is possible
- Quick and easy widening of the working surface
- by up to 1.5 m
- Permissible live load: 1.5 kN/m² (scaffolding group 2)
Double Construction for Uni Standard
Special designs are individualised tower structures that make work safer and faster at many construction sites.
- This special design conforms to the minimum requirements as per DIN EN 1004.
- Working height 8.35 m
- Area of working platform: 2.0 x 2.85 m.
- Permissible live load: 1.5 kN/m² (scaffolding group 2).
Tower Supports for Uni Standard P2 & Uni Wide P2
- The Uni Standard P2 and Uni Wide P2 rolling towers are also available with tower supports.
- They are supplied complete as a set in a wide range of assembly heights up to a working height of 13.2 m.
- The use of Layher tower supports means that the mobile beam is no longer required and the overall weight of the tower is reduced by up to 43 kg. In addition, fewer ballast weights are needed.
LAYPLAN CLASSIC AND LAYPLAN CAD
LAYPLAN CLASSIC AND
LAYPLAN CAD
Time and material are crucial factors in scaffolding construction. To make the most efficient use of both, the Layher range includes the integrated software solution LayPLAN SUITE. Several software packages are on offer for different requirements: LayPLAN CLASSIC, LayPLAN CAD.
You May Also Like
Scaffolding made simple. Find safe, efficient solutions with Layher’s Allround®, SpeedyScaf, Star Frame, towers, accessories & more.
Safeguard your project with Layher’s weatherproof roofs, noise control, and find ALLROUND®, KEDER XL, Cassette Scaffolding & Edge Protection.
Tackle demanding shoring, forming, and propping tasks with Layher’s heavy-duty towers and the innovative TG 60 system.
From scaffolding and stairs to bridging systems, Layher offers everything you need for safe and efficient construction access.
Build faster, safer with Layher’s innovative products. Steel Deck LW & Aluminium Twixbeam offer lighter, efficient scaffolding.
